.jpg)
Low strength threadlocker
Penetrating threadlocker
Medium strength threadlocker
High strength threadlocker
Locking
and sealing nuts and bolts
Anaerobic products – a drop or two is sufficient to lock nuts and bolts in place. This will prevent rust-lock and stop vibration loosening parts.
AJett anaerobics also seal against leakage and corrosion and will resist common chemicals and solvents.
They cure at room temperature and most can be undone with hand tools. Click here for more information about threadlocking.
AJett 106 Low strength threadlocker
Low strength grade where easy dismantling is required. Stops vibration loosening parts and seals against leakage and corrosion. Can be undone with hand tools.
Typical uses Locking small or long threaded precision screws; set screws that need adjusting.
Colour Opaque purple
Viscosity at 25°C 1,200 mPas
Breakaway torque 3 to 9 N.m
Handling strength 30 minutes
Temperature range -50 to +150°C
Recommended thread sizes 2.2 to 12 mm
Packaging 10 and 50 ml bottles
TOP OF THE PAGE
AJett 110 Penetrating threadlocker
Very low viscosity, medium strength anaerobic threadlocker that wicks into tightened threads - ideal, too, for sealing small gaps, holes and cracked metal surfaces.
Typical uses Locking screws after positioning. Sealing porous die castings.
Colour Green fluorescent
Viscosity at 25°C 12.5 mPas
Breakaway torque 3 to 17 N.m
Handling strength 30 minutes
Temperature range -50 to +150°C
Recommended thread sizes 2.2 to 12 mm
Packaging 10 and 50 ml bottles
TOP OF THE PAGE
AJett 120 Medium strength threadlocker
Medium strength grade, oil tolerant product. Excellent on stainless steel and plated parts. Ideal general purpose threadlocker. Can be undone with hand tools.
Typical uses General threadlocking. Replaces Nylock nuts, lock nuts and star washers.
Colour Opaque blue
Viscosity at 25°C 2,250 mPas
Breakaway torque 15 to 25 N.m
Handling strength 30 minutes
Temperature range -50 to +150°C
Recommended thread sizes 2.2 to 12 mm
Packaging 10, 50 and 250 ml bottles
TOP OF THE PAGE
AJett 126 High strength threadlocker
High strength grade for heavy duty applications where full strength required, but not disassembly. Allows reuse of damaged studs and stud holes to be reclaimed.
Typical uses Free running studs to remove stress points. Holding studs in place while nuts removed.
Colour Green fluorescent
Viscosity at 25°C 500 mPas
Breakaway torque 16 to 36 N.m
Handling strength 30 minutes
Temperature range -50 to +150°C
Recommended thread sizes 10 to 27 mm
Packaging 10, 50 and 250 ml bottles
TOP OF THE PAGE
Anaerobic products – a drop or two is sufficient to lock nuts and bolts in place. This will prevent rust-lock and stop vibration loosening parts.
AJett anaerobics also seal against leakage and corrosion and will resist common chemicals and solvents.
They cure at room temperature and most can be undone with hand tools. Click here for more information about threadlocking.
AJett 106 Low strength threadlocker
Low strength grade where easy dismantling is required. Stops vibration loosening parts and seals against leakage and corrosion. Can be undone with hand tools.
Typical uses Locking small or long threaded precision screws; set screws that need adjusting.
Colour Opaque purple
Viscosity at 25°C 1,200 mPas
Breakaway torque 3 to 9 N.m
Handling strength 30 minutes
Temperature range -50 to +150°C
Recommended thread sizes 2.2 to 12 mm
Packaging 10 and 50 ml bottles
TOP OF THE PAGE
AJett 110 Penetrating threadlocker
Very low viscosity, medium strength anaerobic threadlocker that wicks into tightened threads - ideal, too, for sealing small gaps, holes and cracked metal surfaces.
Typical uses Locking screws after positioning. Sealing porous die castings.
Colour Green fluorescent
Viscosity at 25°C 12.5 mPas
Breakaway torque 3 to 17 N.m
Handling strength 30 minutes
Temperature range -50 to +150°C
Recommended thread sizes 2.2 to 12 mm
Packaging 10 and 50 ml bottles
TOP OF THE PAGE
AJett 120 Medium strength threadlocker
Medium strength grade, oil tolerant product. Excellent on stainless steel and plated parts. Ideal general purpose threadlocker. Can be undone with hand tools.
Typical uses General threadlocking. Replaces Nylock nuts, lock nuts and star washers.
Colour Opaque blue
Viscosity at 25°C 2,250 mPas
Breakaway torque 15 to 25 N.m
Handling strength 30 minutes
Temperature range -50 to +150°C
Recommended thread sizes 2.2 to 12 mm
Packaging 10, 50 and 250 ml bottles
TOP OF THE PAGE
AJett 126 High strength threadlocker
High strength grade for heavy duty applications where full strength required, but not disassembly. Allows reuse of damaged studs and stud holes to be reclaimed.
Typical uses Free running studs to remove stress points. Holding studs in place while nuts removed.
Colour Green fluorescent
Viscosity at 25°C 500 mPas
Breakaway torque 16 to 36 N.m
Handling strength 30 minutes
Temperature range -50 to +150°C
Recommended thread sizes 10 to 27 mm
Packaging 10, 50 and 250 ml bottles
TOP OF THE PAGE
NB All data are typical values based on steel parts at 25°C. Viscosities determined by Brookfield viscometric methods.
Advanced
Adhesives (UK) Limited
Chater Lea Buildings, Icknield Way,
Letchworth, SG6 1EZ, England
Phone UK 01462 677060
Fax UK 01462 677070
Phone International +44 146 26 77
060
Fax International +44 146 26 77 070
E-mail info@ajett.com
Web www.ajett.com
| Threadlocking | Retaining | Pipe sealing | Gasketing |
| Bonding | Structural adhesive | Epoxies |
| Activators | Professional | Data sheets |
