.jpg)
AJett
211
Bearing retainer
Multi-purpose retainer
High temperature retainer
High strength retainer
Anaerobic products – ensure 100% contact between mating surfaces: bearings, housings, keyways, pins, splines or shafts.
AJett retainers enable slip-fitted parts to be used for rapid, easy assembly and lower machining costs. Protects against corrosion and vibration loosening parts.
They cure at room temperature and most can be undone with hand tools.
AJett 211 Bearing retainer
Medium strength grade for retaining all types of cylindrical parts on shafts and in housings etc. Can be used on ‘as received parts’. Allows larger tolerances to be used.
Typical uses Oil seals; bearings on shafts and in housings; bushes in soft metals; impellers, splines, keys.
Colour Yellow
Viscosity at 25°C 525 mPas
Maximum gap fill 0.25 mm
Shear strength 7 to 16 N/mm²
Handling strength 30 minutes
Temperature range -50 to +150°C
Packaging 10 and 50 ml bottles
TOP OF THE PAGE
AJett 220 Multi-purpose retainer
Good shear strength grade for retaining slip fitted parts and increasing the strength of press fitted parts – which helps to reduce machining costs. Allows larger tolerances to be used.
Typical uses Shafts, rotors, gears, pulleys, sleeves, bushes, pins, keys, dowels, bearings, oils seals.
Colour Green
Viscosity at 25°C 125 mPas
Maximum gap fill 0.25 mm
Shear strength 17 to 22 N/mm²
Handling strength 30 minutes
Temperature range -50 to +150°C
Packaging 10 and 50 ml bottles
TOP OF THE PAGE
AJett 227 High temperature retainer
deal for bonding components when temperature resistance up to 230°C is required. Vibration, shock and corrosion proof. Allows larger tolerances to be used.
Typical uses Cylindrical parts, keyways, bearings, locating pins, sleeves for pump housings.
Colour Green
Viscosity at 25°C 8,500 mPas
Maximum gap fill 0.25 mm
Shear strength 17 to 37 N/mm²
Handling strength 30 minutes
Temperature range -50 to +230°C
Packaging 10 and 50 ml bottles
TOP OF THE PAGE
AJett 231 High strength retainer
Very high shear strength grade for the permanent retention of slip and press fitted components, including bushings and sleeves. Allows larger tolerances to be used.
Typical uses Shafts, rotors, gears, pulleys, bushes, pins, keys and dowels.
Colour Green fluorescent
Viscosity at 25°C 2,500 mPas
Maximum gap fill 0.25 mm
Shear strength 22 to 40 N/mm²
Handling strength 30 minutes
Temperature range -50 to +150°C
Packaging 10 and 50 ml bottles
TOP OF THE PAGE
NB All data are typical values based on steel parts at 25°C. Viscosities determined by Brookfield viscometric methods.
Advanced
Adhesives (UK) Limited
Chater Lea Buildings, Icknield Way,
Letchworth, SG6 1EZ, England
Phone UK 01462 677060
Fax UK 01462 677070
Phone International +44 146 26 77
060
Fax International +44 146 26 77 070
E-mail info@ajett.com
Web www.ajett.com
TOP
OF THE PAGE
| Threadlocking | Retaining | Pipe sealing | Gasketing |
| Bonding | Structural adhesive | Epoxies |
| Activators | Professional | Data sheets |
