.jpg)
Fast repair pure epoxy
n Fast setting epoxy in a handy syringe.
n Mends metal wood, ceramic, porcelain, plastics and glass.
n Cures in three to five minutes to a clear, super-strong finish.
n Ideal for rapid, small scale repairs and filling small holes and cracks.
n Can be filed, drilled, tapped and painted.
n Easy to mix and use.
TOP OF THE PAGE
AJett Cold Weld
Bonding compound
n Takes just 15 minutes for AJett Cold Weld to make a tough,
permanent bond that sets like a weld.
n Repairs, seals and fixes.
n Bonds almost anything – metals, glass, jewellery, marble, plastics,
rubber, stone.
n Resists all common fluids.
n Will not shrink or crack.
TOP OF THE PAGE
AJett Metal Set
For fast metal repair
n The ideal epoxy for fast metal repair – functional strength in
30 minutes.
n Repairs castings, valves, pumps, pipes and tanks.
n Cures to a steel-hard finish.
n Fast acting – minimises downtime.
n Easy to mix and use.
TOP OF THE PAGE
AJett Wood Glue
Water proof
Exterior grade AJett Wood Glue can be used on all types of wood. It
makes a strong bond and is ideal for repair jobs around the home,
workshop and boat.
n Bonds:
l Soft woods
l Hard woods
l Chipboard
l Veneers
l Laminated plastics
n Also bonds paper, cloth, cardboard and most other porous materials.
n Durable bond.
n Fast initial tack.
n Water and moisture resistant – withstands high humidity.
n Meets category D3/3 and D3/4 of EN 24 requirements.
n Suitable for kitchen and bathroom use.
n Use it to bond window frames, furniture and doors etc.
n Dries clear – non-staining.
n Safe – no harmful fumes.
TOP OF THE PAGE
AJett MDF Bonder
Set mitred profiles and cornices in just 10 seconds!
AJett’s MDF Bonder will rapidly bond close fitting mitred joints made from MDF and similar materials.
For kitchen installers, it’s the perfect solution to the problem of neatly and rapidly joining cornices, gallery rails, valances, pelmets, decorative trim and other mitred joints.
MDF Bonder has been specially formulated to bond porous surfaces like cut MDF. It is so strong that only one or two drops per joint are usually needed – one pack can make 100 joints!
And being a transparent liquid, AJett MDF Bonder makes a very clean, tight joint every time.
There’s no heating or mixing required either – it’s instantly ready to use. Just spray activator on to one joint, apply a couple of drops of adhesive to the other, hold them together for 10 seconds and job done.
n Hard, tight joint in 10 seconds.
n Functional strength in minutes.
n Full strength within 12 hours.
n Temperature resistance of -60 to +80°C.
n Excellent mechanical and chemical resistance.
n Resists all household cleaners.
TOP OF THE PAGE
AJett Multi-Surface Bonder
Special instant adhesive for gluing porous or absorbent materials, including:
l Wood
l Leather
l Fabric
l Paper
l Card
l Rubber
l Metals
l Cork
l Some plastics
n AJett Multi-Surface Bonder will glue most of these materials in under
10 seconds and give a good, firm bond.
n Only a few drops are required for an effective bond.
n Cures at room temperature.
TOP OF THE PAGE
Advanced Adhesives (UK) Limited
Chater Lea Buildings, Icknield Way,
Letchworth, SG6 1EZ, England
Phone UK 01462 677060
Fax UK 01462 677070
Phone International +44 146 26 77 060
Fax International +44 146 26 77 070
E-mail info@ajett.com
Website www.ajett.com
TOP OF THE PAGE
| Threadlocking | Retaining | Pipe sealing | Gasketing |
| Bonding | Structural adhesive | Epoxies | Activators |
| Professional | Data sheets |
