AJett - epoxy products

AJett epoxies – versatile and easy to use

If you need to repair broken, cracked, worn or damaged castings, valves, pumps, tanks or machine tools, fill a hole or repair a badly scored housing or shaft, epoxies are often the easiest and most reliable material to use.

These AJett epoxies are tried and tested formulas which resist solvents and lubricants, won’t rust or shrink and, when cured, can be drilled, tapped, filed, machined, sanded and painted – just like metal.

AJett epoxies are two-part products with the convenience of 1:1 mixing ratios. They cure at room temperature.

AJett 701 Steel filled epoxy paste

A multi-purpose epoxy – makes tough, permanent repairs to metal, ceramics, concrete, wood and some thermosetting plastics. Fills large and small gaps. Spreads easily. 1:1 mixing ratio.

Typical uses Repairs to castings, pumps, pipes, valves and tanks; filling holes, cracks and worn areas, making templates or levelling machinery.

Colour Dark grey paste
Shore D hardness 80
Compressive strength 60 N/mm²
Working time 30 minutes at 20°C
Handling time 2 hours at 20°C
Temperature range -20 to +120°C continuous*
Packaging 2 x 250g tubs

TOP OF THE PAGE

AJett 702 Aluminium filled epoxy paste

A versatile adhesive/filler for metal and other materials. Ideal for maintenance and repair of aluminium and other metal castings, low pressure pipes, tanks and automotive bodywork. 1:1 mixing ratio.

Typical uses Repairs to aluminium castings, components, pumps, pipes, valves and tanks; filling holes, cracks and worn areas.

Colour Light grey paste
Shore D hardness 80
Compressive strength 60 N/mm²
Working time 30 minutes at 20°C
Handling time 2 hours at 20°C
Temperature range -20 to +120°C continuous*
Packaging 2 x 250g tubs

TOP OF THE PAGE

AJett 740 Fast Set epoxy liquid

A fast setting – around five minutes depending on temperature – pure epoxy. Can be used on metal, wood, ceramic, porcelain and glass. Very easy to mix. When cured, can be filed, drilled, painted etc.

Typical uses Small scale repairs and filling small holes, cracks and worn areas. Will bond components and can be used to fill screw holes.

Colour Pale yellow, viscous liquid
Shore D hardness 65
Compressive strength 25 N/mm²
Working time 3 to 4 minutes at 20°C
Handling time 10 to 15 minutes at 20°C
Temperature range -20 to +120°C (dry heat)
Packaging 50 ml syringe

TOP OF THE PAGE

*Continuous service temperature without load. Intermittent without load: -20 to +150°C. Continuous subjected to load: -20 to +60°C.

Advanced Adhesives (UK) Limited
Chater Lea Buildings, Icknield Way,
Letchworth, SG6 1EZ, England

Phone UK 01462 677060
Fax UK 01462 677070

Phone International +44 146 26 77 060
Fax International +44 146 26 77 070

E-mail info@ajett.com
Web www.ajett.com

TOP OF THE PAGE


Epoxies

		AJett 701 Steel filled epoxy paste
		AJett 702 Aluminium filled epoxy paste
		AJett 740 Fast Set epoxy liquid

	AJett epoxies – versatile and easy to use If you need to repair broken, cracked, worn or damaged castings, valves, pumps, tanks or machine tools, fill a hole or repair a badly scored housing or shaft, epoxies are often the easiest and most reliable material to use. These AJett epoxies are tried and tested formulas which resist solvents and lubricants, won’t rust or shrink and, when cured, can be drilled, tapped, filed, machined, sanded and painted – just like metal. AJett epoxies are two-part products with the convenience of 1:1 mixing ratios. They cure at room temperature. AJett 701 Steel filled epoxy paste A multi-purpose epoxy – makes tough, permanent repairs to metal, ceramics, concrete, wood and some thermosetting plastics. Fills large and small gaps. Spreads easily. 1:1 mixing ratio. Typical uses Repairs to castings, pumps, pipes, valves and tanks; filling holes, cracks and worn areas, making templates or levelling machinery. Colour Dark grey paste Shore D hardness 80 Compressive strength 60 N/mm² Working time 30 minutes at 20°C Handling time 2 hours at 20°C Temperature range -20 to +120°C continuous* Packaging 2 x 250g tubs TOP OF THE PAGE AJett 702 Aluminium filled epoxy paste A versatile adhesive/filler for metal and other materials. Ideal for maintenance and repair of aluminium and other metal castings, low pressure pipes, tanks and automotive bodywork. 1:1 mixing ratio. Typical uses Repairs to aluminium castings, components, pumps, pipes, valves and tanks; filling holes, cracks and worn areas. Colour Light grey paste Shore D hardness 80 Compressive strength 60 N/mm² Working time 30 minutes at 20°C Handling time 2 hours at 20°C Temperature range -20 to +120°C continuous* Packaging 2 x 250g tubs TOP OF THE PAGE AJett 740 Fast Set epoxy liquid A fast setting – around five minutes depending on temperature – pure epoxy. Can be used on metal, wood, ceramic, porcelain and glass. Very easy to mix. When cured, can be filed, drilled, painted etc. Typical uses Small scale repairs and filling small holes, cracks and worn areas. Will bond components and can be used to fill screw holes. Colour Pale yellow, viscous liquid Shore D hardness 65 Compressive strength 25 N/mm² Working time 3 to 4 minutes at 20°C Handling time 10 to 15 minutes at 20°C Temperature range -20 to +120°C (dry heat) Packaging 50 ml syringe TOP OF THE PAGE Continuous service temperature without load. Intermittent without load: -20 to +150°C. Continuous subjected to load: -20 to +60°C. Advanced Adhesives (UK) Limited* Chater Lea Buildings, Icknield Way, Letchworth, SG6 1EZ, England Phone UK 01462 677060 Fax UK 01462 677070 Phone International +44 146 26 77 060 Fax International +44 146 26 77 070 E-mail info@ajett.com Web www.ajett.com TOP OF THE PAGE \| Threadlocking \| Retaining \| Pipe sealing \| Gasketing \| \| Bonding \| Structural adhesive \| Epoxies \| \| Activators \| Professional \| Data sheets \|