.jpg)
.jpg)
.jpg)
.jpg)
Instant adhesive
Low viscosity, extra fast curing instant adhesive for consistent bonds and excellent humidity resistance – with Primer 900, AJett 500 gives good results on polyolefin plastics too.
Typical uses Bonding a wide variety of plastics and rubbers, including ‘greasy’ plastics when AJett Primer 900 is used.
Colour Clear colourless liquid
Viscosity at 25°C 20 to 30 mPas
Tensile shear strength 20 N/mm²
Handling strength <5 seconds
Maximum gap fill 0.10 mm
Temperature range -30 to +70°C
Packaging 20 and 50 g plastic bottles
TOP OF THE PAGE
AJett 501 Multi-surface bonder
Instant adhesive – liquid
Ideal instant adhesive for bonding any porous surface as well as rubber, metals and some plastics. It has high shear strength and will bond most substrates in under 10 seconds.
Typical uses Bonding absorbent materials such as wood, leather, paper, card, ceramics, cork and fabric; some rubbers, metals and plastics.
Colour Clear colourless liquid
Viscosity at 25°C 90 to 120 mPas
Tensile shear strength 18 N/mm²
Handling strength <5 seconds
Maximum gap fill 0.15 mm
Temperature range -30 to +70°C
Packaging 5, 20 and 50 g plastic bottles
TOP OF THE PAGE
AJett 554 Multi-surface bonder
Instant adhesive – gel
A non-running, non-drip gel formulation for bonding components in vertical or overhead positions. Gives high strength results on porous surfaces as well as rubber, metals and some plastics.
Typical uses Bonding absorbent materials such as wood, leather, paper, card, ceramics, cork and fabric; some rubbers, metals and plastics.
Colour Clear colourless gel
Viscosity at 25°C Thixotropic
Tensile shear strength 18 N/mm²
Handling strength <5 seconds
Maximum gap fill 0.25 mm
Temperature range -30 to +70°C
Packaging 20 g tubes
TOP OF THE PAGE
AJett 502 Metal bonder
Instant adhesive
Best choice instant adhesive for high strength bonds between metal parts or metal to plastics and rubbers. High resistance to fatigue, vibrations and organic solvents.
Typical uses Bonding all common metals, including steel, stainless steel, aluminium and copper. Bonding metals to plastics and rubbers.
Colour Clear colourless liquid
Viscosity at 25°C 90 to 120 mPas
Tensile shear strength 24 N/mm²
Handling strength 5 to 10 seconds
Maximum gap fill 0.15 mm
Temperature range -30 to +70°C
Packaging 20 and 50 g plastic bottles
TOP OF THE PAGE
AJett 504 General purpose bonder
Instant adhesive
For the rapid bonding of rigid or flexible substrates, including rubber, plastics and metal. It is extremely fast curing, has good humidity resistance and offers a low unit cost on each bond.
Typical uses General bonding of a wide variety of substrates, including elastomeric materials, metals, rubbers, wood and plastics.
Colour Clear colourless liquid
Viscosity at 25°C 25 to 35 mPas
Tensile shear strength 18 N/mm²
Handling strength <5 seconds
Maximum gap fill 0.15 mm
Temperature range -30 to +70°C
Packaging 20 g bottles
TOP OF THE PAGE
AJett 505 Profile bonder
Instant adhesive
A very low viscosity, instant adhesive for bonding materials such as EPDM and TPE glazing gaskets used in double glazing systems. Also for making ‘O’ rings and bonding wax castings.
Typical uses Joining EPDM or TPE gaskets. Assembly of wax castings prior to shelling. Tacking plastic components in position. Making ‘O’ rings.
Colour Clear colourless liquid
Viscosity at 25°C 25 to 35 mPas
Tensile shear strength 18 N/mm²
Handling strength <5 seconds
Maximum gap fill 0.15 mm
Temperature range -30 to +70°C
Packaging 20 g plastic bottles
TOP OF THE PAGE
AJett 900 Polyolefin primer
for plastics
A specially formulated water-thin and brushable solvent for
pre-application with AJett cyanoacrylate adhesives to bond polyolefins. AJett
900 improves the adhesives’ bonding performance on difficult to bond
polyolefin plastics such as polypropylene, high and low density polyethylene
and PTFE as well as thermoplastic rubber materials and EPDM. Touch dry
almost immediately, AJett 900 can be used with AJett 500 cyanoacrylate adhesive
to achieve, in many cases, substrate failure of bonded assemblies.
Typical
uses With AJett 500, bonding ‘greasy’ plastics.
Colour Clear water white liquid
Viscosity at 25°C 1 mPas
Cured tensile shear strength Substrate failure with AJett
500
Handling strength 0.1 to 2 seconds with AJett 500
Maximum gap fill 0.25 mm with AJett 500
Temperature range -30 to +70°C with AJett 500
Packaging 20 ml brush top bottle
TOP
OF THE PAGE
AJett 901 Activator
for instant adhesives
AJett 901 increases the cure speed of AJett instant adhesives,
especially in conditions of under 5°C or if the gap is large. AJett
901 can also be used after assembly to cure the adhesive outside the bond
line.
Typical uses Speeding up the bonding process.
Colour Clear liquid
Maximum gap fill Can double gap fill of AJett instant adhesive
Packaging 200 ml aerosol
TOP
OF THE PAGE
Advanced
Adhesives (UK) Limited
Chater Lea Buildings, Icknield Way,
Letchworth, SG6 1EZ, England
Phone UK 01462 677060
Fax UK 01462 677070
Phone International +44 146 26 77
060
Fax International +44 146 26 77 070
E-mail info@ajett.com
Web www.ajett.com
TOP
OF THE PAGE
| Threadlocking | Retaining | Pipe sealing | Gasketing |
| Bonding | Structural adhesive | Epoxies |
| Activators | Professional | Data sheets |
