.jpg)
Pack
sizes
AJett anaerobic products are readily available in 50 ml plastic bottles (accordion
packs for products 311 and 408); some anaerobics are also available in 10 ml
and 250 ml bottles. Cyanoacrylates are produced in 20g and 50g plastic
bottles.
Logical code numbers
If you are ever confused by the code numbers that adhesive manufacturers
give to their products, look at how the much simpler AJett system works –
The
first digit represents the type of product:
Code Product
type
100 series Threadlocking
200 series Retaining
300 series Sealing
400 series Gasketing
500 series Instant
adhesives
700
series Epoxies
900 series Activators
and primers
The
second two digits represent a product’s
strength*
– the larger the number, the higher its
strength
(in N.m or N/mm²).:
Code Strength **
0x 0
to 9
1x 10
to 19
2x 20
to 29
3x 30
to 39
* Not instant adhesives or primers. **Average value.
MIL specification
AJett products comply with existing US military specifications.
Conversion factors
Pressure or stress
N/mm² x 145 = lb/in² (psi) x 0.00689 = N/mm².
MPa (MN/m²) x 145 = lb/in² (psi) x 0.00689 = MPa (MN/m²).
Torque
N.m x 8.85 = lb.in x 0.113 = N.m.
Viscosity
cP = mPa.s (centipoise = millipascal seconds).
Advanced
Adhesives (UK) Limited
Chater Lea Buildings, Icknield Way,
Letchworth, SG6 1EZ, England
Phone UK 01462 677060
Fax UK 01462 677070
Phone International +44 146 26 77
060
Fax International +44 146 26 77 070
E-mail info@ajett.com
Web www.ajett.com
TOP
OF THE PAGE
| Threadlocking | Retaining | Pipe sealing | Gasketing |
| Bonding | Structural adhesive | Epoxies |
| Activators | Professional | Data sheets |
